■機床整體架構采用單梁龍門式結構，保證機床的高剛性和高穩定性。

■機床底座采用分離式水箱設計，方便用戶清理冷卻液沉淀物質。

■珩磨砂條漲縮裝置為液壓雙進給結構，采用液壓比例控制技術設定實現壓力控制。

■機床工作臺采用高精度雙工位液壓回轉工作臺，單軸雙工位模式，工作輔助時間為零。

■靈活多樣的機床夾具結構，也可根據用戶需求定制。

■機床配置在線自動測量系統以保證珩磨工件尺寸一致性。

■采用高性能運動控制器，運行穩定可靠。

■集成操作平臺，配置TFT彩色液晶觸控面板。專為珩磨加工定制的人機界面更具人性化。

■集中潤滑系統間歇供油，延長滑動部件使用壽命。

■ Single-girder gantry frame of machine ensures high rigidity and stability.

■ Machine base using separate water tank design, user-friendly coolant clean up sediment.

■ Honing extension system is in hydraulic double-feed design, in which constant pressure control is ensured by use of proportionally controlled technique set by pressure regulating vlave .

■ The machine table is duplex hydraulic rotary table, single axis duplex position mode, the work auxiliary time is zero.

■ Flexible ways chucking type，can design on customers requirement.

■ The machine is equipped with an on-line metering and measuring system, which ensures consistency of honing tolerances.

■ The machine is controlled by high-performance programmable logic controller, stable and reliable operation.

■ Integrated platform, with TFT liquid crystal color touch panel. The human-machine interface especially made for honing shows humanistic feature.

■ Intermittent oil lubrication system, to extend the service life of the sliding member.

■液壓系統采用雙變量泵，主軸往復液壓控制與其他液壓控制分離，并采用油冷機強制冷卻，保證液壓油溫度恒定。

■Double variable pump is used in hydraulic unit. Hydraulic control of spindle reciprocation system is separated from control for other systems. Forced cooling is supplied for hydraulic unit by an oil cooler, which guarantees constant temperature oil.

16A過濾機

■機床冷卻系統為循環冷卻，采用雙油箱設計，磁分式紙帶過濾機兩級過濾,并使用油冷機強制冷卻。

■ Machine tool cooling cycle cooling system, dual fuel tank design, magnetic tape filter two-stage filtration fraction, and an oil cooler forced cooling.

■機床夾具采用下壓油缸方式，也可訂制膠套包容夾具結構。
■Down press type oil cylinder, Optional rubber sleeve hold fixture .

■主軸往復運動采用高性能液壓伺服控制技術，往復速度可實現無級調速，響應速度快。

■ A high performance hydraulic servo technique control of position and speed is used for spindle reciprocation. Therefore infinite variable speed and quick response speed are realized.

■主軸旋轉運動采用變頻電機驅動，可實現無級變速。
■ Spindle rotational movement driven by frequency conversion motor, continuously variable transmission can be realized.

EDHM16A系列高性價比珩磨機規格參數