■機床整體架構采用鑄鐵床身，加高單立柱結構，結構緊湊，確保了機床的高剛性和高穩定性。
■機床冷卻系統為循環冷卻，采用雙油箱設計，磁分式紙帶過濾機兩級過濾,并使用油冷機強制冷卻。
■主軸往復和旋轉運動采用高性能伺服電機控制，速度可實現同步控制，響應速度快。
■珩磨砂條漲縮裝置為液壓雙進給結構，采用液壓比例控制技術或手動調壓閥設定實現壓力控制。
■機床工作臺采用高精度雙工位液壓回轉工作臺，單軸雙工位模式，工作輔助時間為零。
■采用歐姆龍高性能運動控制器，運行穩定可靠。
■集成操作平臺，配置TFT彩色液晶觸控面板。專為珩磨加工定制的人機界面更具人性化。
■集中潤滑系統間歇供油，延長滑動部件使用壽命。
■ The overall structure of the machine tool is cast iron bed with a single column structure, which is compact and ensures the high rigidity and stability of the machine tool.
■ Machine tool cooling cycle cooling system, dual fuel tank design, magnetic tape filter two-stage filtration fraction, and an oil cooler forced cooling.
■ The reciprocating and rotating movement of the main shaft is controlled by a high-performance servo motor. The speed can be synchronously controlled and the response speed is fast.
■ Honing extension system is in double-feed design, Adopt hydraulic proportional control technology to realize pressure closed-loop control.
■ The machine table is duplex hydraulic rotary table, single axis duplex position mode, the work auxiliary time is zero.
■ The machine is controlled by OMRON high-performance motion controller, stable and reliable operation.
■ Integrated platform, with TFT liquid crystal color touch panel. The human-machine interface especially made for honing shows humanistic feature.
■ Intermittent oil lubrication system, to extend the service life of the sliding member.